Good news Michel, I managed to see the EIS coming on with my ammeter hooked up. It only draws a small amount of current for about 1 min. I searched a little further on your boot light theory. I found that it only goes off sometimes . I suppose something is a little out of alignment with the switch. I done a small modification and all is OK now. See you Friday
Good news Michel, I managed to see the EIS coming on with my ammeter hooked up. It only draws a small amount of current for about 1 min. I searched a little further on your boot light theory. I found that it only goes off sometimes . I suppose something is a little out of alignment with the switch. I done a small modification and all is OK now. See you Friday
Could be sooner rather than later . Wife or ex what ever the case may be has moved to coffs harbour last week. Now to find a recipient for a large m100 .
Hi Helmet , does the guy who advertises in the IAME Magazine repair these Ign. Switches ?
My mate who bought my Instrument Cluster Repair Business ( 10 years ago ) .... I believe can read and reprogram them and the Clusters.
He's been simply wonderful, a true gentleman and a master craftsman.
Found the culprit that many who tested that problem didn't.
He fixed it and the charges were very reasonable
He's been simply wonderful, a true gentleman and a master craftsman.
Found the culprit that many who tested that problem didn't.
He fixed it and the charges were very reasonable