Buick 36 Century Racing

[motec 6.9]

Hi guys I have said before I would one day like a Buick and it will be a Straight 8 . As that is the same reason I am doing up my 6.9 I don't like being the same as everyone else. If I had the money a Rolls Royce Phantom 2 Hot Rod with Straight 6 still in place high comp pistons Gearvendors overdrive maybe EFI and hide it to look stock same as vintage air and maybe power steering it would be a retro Rod P11 . Any way back to post this is a forum member I have emailed before on another forum . He is selling Straight 8 Speed gear roller rockers cams pistons and billet rods. Enjoy his world record Bonneville run. http://www.youtube.com/watch?v=cdoFmTDv_MI http://www.youtube.com/watch?v=RsLspqirjHA&list=UU6u34uim000sFw1jQgKKo3A http://www.youtube.com/watch?v=3idP2Fht5zc&index=13&list=UU6u34uim000sFw1jQgKKo3A http://www.youtube.com/watch?v=Bmt1WaIiMEo&index=14&list=UU6u34uim000sFw1jQgKKo3A
There drag car 36 http://www.youtube.com/watch?v=PSjLZWm180I&index=16&list=UU6u34uim000sFw1jQgKKo3A http://www.youtube.com/watch?v=GwgxlQjS7Y0&list=UU6u34uim000sFw1jQgKKo3A&index=24

 

[motec 6.9]

http://www.youtube.com/watch?v=tQrduPZ1xfI http://www.youtube.com/watch?v=NIDZ7m7uzjM http://www.youtube.com/watch?v=azMmt-A2_NA http://www.youtube.com/watch?v=fV0MkSJEumo http://www.youtube.com/watch?v=tDoA4HJNf-I http://www.youtube.com/watch?v=tm-A06AGEew http://www.youtube.com/watch?v=71QbhORKCb0

 

[Styria]

Geoff, who is going to look up this 'mumbo jumbo' that is contained within these posts ? Surely, you should be able to list links in some sort of tidiness, with spacings and line markings so that we can see easily what links you have posted. I am sorry, but the 'layout' leaves a lot to be desired. Regards Styria

N.B. Surely it should not be difficult to use separate lines, and double spacing ? Look at Tim's posts - he has double spacing, he gets his message across, and it is neat and tidy, and easily legible.

 

[motec 6.9]

THEY ARE JUST YOUTUBE CLIPS THAT I HAVE ADDED WITH THE INFORMATION PROVIDED IF YOU DONT LIKE IT . YOU KNOW WHAT YOU CAN DO.

 

[Oversize]

Ease up chaps! Just add a few returns after the links Motec and it'll make it far easier to read and it'll also mean no links get missed; easy really.

Just remember these are public posts and new members will be turned away if we're misbehaving. Motec I'd suggest you delete your last one...

 

[Oversize]

I wish the operator could hold the camera still! Some are almost unwatchable, as it's shaking all over the place.... Do they even check this stuff before uploading?

 

[motec 6.9]

Probably not but you should enjoy some links on Hudson post

 

[motec 6.9]

Hi Mark you must admit the rods are a work off art.

 

[motec 6.9]

And more enjoy down the road
http://www.youtube.com/watch?v=e4B4W4tLqig

 

[Styria]

Geoff, I took the trouble to look at each and everyone of your You Tube links in the first post, primarily as a token of good faith and appreciation of your efforts in providing the links.
Unfortunately, there was not a great deal to hold one's interest. The videos are very short - invariably, as a rule when I submit You Tube videos, I endeavour to aim for a duration of not less than three minutes for each video. As you know, I am very partial to Buicks of the late '40s, '50s and '60s, but in order to appreciate them properly, I endeavour to look at the interiors, and perhaps even a short story that one could perhaps reply to in a meaningful way. Regards Styria

 

[motec 6.9]

Hi Styria the 36 Buick set a world record in its class last year at Bonneville that is the main reason for the post as against all the odds of design limitation with the Buick Straight 8 they have managed to get them to rev and perform . And as I have admitted inline flathead and straight 8 s are engines I have an interest in . In its own way they are doing what any 6.3 or 6.9 M-100 owner faces as there is no aftermarket support or parts to improve these engines. If I could find better video of this team or car I would have posted it.