Search results

So, I've been pouring through the you-tube vid's of pedal work and found a few interesting ones. First one is maybe a Ford Sierra (probably wrong) in asia, and the driver is fighting this thing all the way.. If you watch the steering throughout, and then reflect on the pedal work and gear...

Just curious as to what prep everyone will be doing on their car's for the upcoming track day?? Servicing? (plugs, leads, filters, electrics, transmission etc) Brakes? (pads, fluids, rotors etc) Tyres (new set, or swap for old set, possibly swap for some r-spec?) Tuning (advance the timing...

Ok, below is the link to a video of a C63 AMG around Wakefield... Anyone know who this was??? On the 2nd lap they're at the 1m12s mark(from the start finish line) and still not gone round the final corner on to the straight... I'm guessing they weren't pushing it that hard? Car like that...

Video's finally up! Thanks to BB for shooting the footage, and also taking the time to splice the in-car audio with the footage. There's commentary throughout - a few funny moments... Next time i'll be using a mini-disc with lapel mic for better clarity. 'Un-Fortunately' :rolleyes: the V8...

Sorry for the delay, finally got the high res pics from the photo guy. Enjoy....

Beautiful Wooden Steering wheel with boss kit.... Brand new Boss kit too! Looks like it'll fit the 21mm spline (bigger one) of the 116's....... Looks like a trusted seller too! :rolleyes: http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=140266728226 Cam2. :)

Here's a few teaser pics... Waiting for my housemate to get home to scan the printout.. That won't be for a couple hours.. Anyone wanna have a stab at the rear wheels HP while we're waiting? Cam2. :)

Here you go folks, an example of M116 heads on an M117. According to the owner, the M116 manifolds wouldn't fit properly so there's been some custom work done there.... MB Spares have confirmed though, that you should still be able to use any of the V8 merc manifolds to bolt on / interchange...

Went pretty well today. Only managed 3 runs as I had to make it to the Raiders match. The whole Evo crew were there and going really fast without looking like they were. The usual suspects were all there, and we were also joined by Rick Bates in a Daihatsu Copen (??think i said that...

G'day.... Any suggestions on the easiest method for throttle linkage adjustments? With the engine off, should I just get someone to push the throttle flat to the floor and then adjust it so that it's at full extension? Last time I just adjusted it by eye and noticed the slight increase.. but...

If anyone has any, or know's of any...in decent condition... hook a brother up!! With the CAM's as well if you have them too. Cheers, Cam2. :)

Here they are... :) 1st one has the 'incident' at about the 4:30 mark. This is where I nearly rolled the car. I hit the ripple strip sideways at somewhere between 120-150km/h, and the saving grace was the rear right wheel hitting the kitty litter flicking me back around...

Ok Topklasse, the results are in. I need to start by saying, WOOOHOOOOOOOOOOOOOO... I didn't come last!! After starting the day by nearly rolling the car (in car footage to come by end of week!!) I managed to get back out there (with the professional help of Ian and his pit crew) and be a...

Classic... http://cgi.ebay.com.au/MERCEDES-BENZ-450-SE-DVD-PS2-PIMPED-OUT-NO-RESERVE_W0QQitemZ230277705409QQihZ013QQcategoryZ35227QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

F*kn worth every cent... If I had the cash i'd buy it straight up. :cool: http://cgi.ebay.com.au/Mercedes-Cosworth-evo-2_W0QQitemZ290245369753QQihZ019QQcategoryZ35227QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I parked my car in an alley way in Carlton... and this is what happened. :cool: Thoughts? Questions?

For once I thought i'd post somewhere else other than the motorsports section, so here it is. Tonight was spent tidying up the front end after bumper removal (weight saving obviously). Sheet of diamond(ish) mesh - $30 Can of Flat Black paint - $9 Drop sheet - $2 and here you have it...

DBA make slotted / hardened rotors for W116's but they are about $250 (per end) so these come in at enough under that (postage included) to make it worth a crack. Still not sure whether i'll go with these rotors or the DBA ones.. but food for though...

.....for a Datsun 120y! :D They'll also suit a 180b, 1200, 1600... So for those people with a quality datsun and wanna chuck on some pimp'd out alloys... here they are - CHEAP!! http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=140243938838&_trksid=p2762.l1259 Yes, they were previously...

Ok Peoples, next event is 13th July @ Sandown. My 'To-Do List' from Winton is below, with a heap of extra's added: Everything in bold is already done. I'll bold things up as I do them over the coming fortnight. New rotors (drilled / vented) plus hopefully some sort of ducting down to the...