Search results

I should take my own advice and not take pics with things 'growing' out of the roof!! After another wash she looks tough! :D

Styria I've ordered a new washer and will have to wait until it arrives from Germany.... I also tracked down the 'O' ring in the picture below and have several on order. What concerns me is the wear on the bottom of the housing, where the securing bolt washer has cut into the surface. Should...

I think Red Bull takes the gong for the worst struts I've ever seen.... :eek: And this explains why she felt so unstable and downright dangerous during my one and only drive. The really frightening thing is that the PO was an old(er) gentleman, who I doubt was aware of the serious problems...

Here's some pics of Red Bull's Ronal (Penta style) wheels, which I think are genuine AMGs. I'm very fortunate that they're also in excellent condition. However the locknuts had me a little curious and I was horrified when I removed the rear ones.... :eek: The same offset as Blue Flame's...

Here's some pics of Red Bull's rotor, which is completely different from the standard one. Note that the one and only time I drove her I felt she was lacking power (even for an Aussie), but I'm not sure if it's due to the angle of the non-standard rotor, a stretched timing chain, plugs...

OMG, I think I just had an out-of-body experience!!!!!!!! :D:D:D:D http://www.youtube.com/watch?v=nYknKhRDM6I&feature=related

Can anyone explain why the W116 is prone to rust, opposed to the W126? I don't think I've seen a rusted out W126, but maybe someone can dig up a nasty pic of a 380? :rolleyes:

This might become even more interesting :): http://www.theage.com.au/sport/motorsport/chrysler-confirms-v8-supercar-interest-20120126-1qjjg.html In lieu of the M100 tour, it looks like we might be headed to Clipsal. Not quite Germany, but we're planning that for 2013...

I changed the oil and filter in Blue Flame recently and after jacking it up on a level surface, I dropped the engine sump plug, engine tank plug, oil filter housing and also removed the pipe at the bottom of the oil cooler (Euro). The front spoiler was removed to avoid oil from the cooler going...

What's missing here (red arrow)?? A circlip is the answer! Not overly critical, but it does highlight an area that's often neglected. The black coloured circular object further along the shaft (and partly hidden behind the mounting plate) is known as a throttle ball (yellow arrow). The...

I noticed that there was a fair bit of dirt that'd built up in the saddles of the rear trailing arms at the base of my struts (6.9). I'd imagine the same would occur with any W116, regardless of whether it has self levelling suspension, or conventional springs. This buildup could cause...

Deteriorated, or missing firewall grommets can be the source of water in the cabin and premature rust elsewhere. This is particularly annoying when you want to steam clean the engine bay. Unfortunately they can also allow noise and emissions into the cabin and aren't easy to replace...

Done by a PO to bipass the ignition cut-out. Not exactly how I'd do it. In fact I'd be very hesitant to modify something that's from what I hear quite rare and expensive to replace. Note 6.9 stamped into the top of the rotor button:

Unfortunately this problem isn't as unique as we all thought. Evidence of a previous repair: :eek:

Ever wondered why your horns sound whimpy; like they belong on a Barina, or Corolla? Ever hesitated to blast your horn, because it's simply too embarrassing? Well I wondered the same thing, especially seeing as they were both working. A closer inspection with a screwdriver revealed that the...

And getting a 6.9 off the stands can be fun when the suspension's completely depressurized.... Rear first. Note that if the timber under rear wheels isn't at least 80mm high, your trolley jack will become trapped underneath the car and you'll need the standard sill jack to rescue it! And...

After removing some cosmetic pieces I started to realize the vulnerability of a W116 to serious engine damage if one was a careless driver. Even a gutter, kerb, or speed hump poses a threat. Especially to a 6.9 that's a little lower than standard. Even worse when parking bays are becoming...

Put the trolley jack under the front main crossmember first, using a piece of timber between the jack and the chassis. Jack the vehicle up and place on the stands, which should be positioned under the rear lower control arm support, where it is bolted to the chassis. Place the trolley jack...

I've been trying to make sense of the system and it totally baffles me. The windscreen washers work, but no headlight washers. Help! To me there seems to be two pickups out of the bottle, one for each pump. There's a pump for the windscreen and one for the headlights. Note that it's...

Here's some closer pics of the wheels. The first one shows the size. After measuring them, I found it also revealed the offset (e11): Normally the wheel centre caps wouldn't fit (unless the bearing covers are modified): And the pilot holes are too big, requiring sleeves to be fitted...