Concours preparation

More threads by 260ebenz

OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Busy again today detailing the 300SE.

Brian please have a look at the door jams & hinges and tell me what you think?

Photos were taken side on so you could see the jams & hinges more clearly well I hope so?
 

Attachments

  • IMG_0419.jpg
    IMG_0419.jpg
    242.9 KB · Views: 2
  • IMG_0428.jpg
    IMG_0428.jpg
    265 KB · Views: 2
  • IMG_0427.jpg
    IMG_0427.jpg
    161 KB · Views: 1
  • IMG_0426.jpg
    IMG_0426.jpg
    286 KB · Views: 3
  • IMG_0425.jpg
    IMG_0425.jpg
    297.7 KB · Views: 1
  • IMG_0424.jpg
    IMG_0424.jpg
    217.8 KB · Views: 1
  • IMG_0423.jpg
    IMG_0423.jpg
    244.8 KB · Views: 1
  • IMG_0422.jpg
    IMG_0422.jpg
    311.6 KB · Views: 1
  • IMG_0421.jpg
    IMG_0421.jpg
    227.1 KB · Views: 3
  • IMG_0420.jpg
    IMG_0420.jpg
    252.8 KB · Views: 2
Last edited:
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Beautiful sunny Spring afternoon took a few snaps of the 300SE as you do!
:D
 

Attachments

  • IMG_0434.JPG
    IMG_0434.JPG
    1.1 MB · Views: 1
  • IMG_0431.JPG
    IMG_0431.JPG
    1,002.9 KB · Views: 2
  • IMG_0429.JPG
    IMG_0429.JPG
    1.1 MB · Views: 3
  • 300SE wheel.jpg
    300SE wheel.jpg
    138.5 KB · Views: 2
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Phew that's a relief thanks Brian!

Okay then how do I remove that excess grease?
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Looks to be dry lube Brian.

Okay micro fibre cloth got plenty of those.

Great you can wash the cloths on there own no washing powder in the w/machine and reuse the cloths.

As for the long fingers see what I can do about that.

Hands, knuckles and fingers covered in grease & dirt, cuts & scratches on my hands the joys of car detailing!

Anyhow really happy with my progress I will just keep chipping away.

300SE is off the car detailers Friday morning to detail underneath the car.

Also clay bared inside the engine bay using Meguiars quick detailer then wipe off the detailer spray.

Only clay bared areas I could access which at times was tricky.
 

BenzBoy

Grand Master
Messages
7,520
Points
705
Location
Sydney - Centre of Civilisation
looks to be dry lube brian.

Okay micro fibre cloth got plenty of those.

Great you can wash the cloths on there own no washing powder in the w/machine and reuse the cloths.

As for the long fingers see what i can do about that.

Hands, knuckles and fingers covered in grease & dirt, cuts & scratches on my hands the joys of car detailing!

Anyhow really happy with my progress i will just keep chipping away.

300se is off the car detailers friday morning to detail underneath the car.

Also clay bared inside the engine bay using meguiars quick detailer then wipe off the detailer spray.

Only clay bared areas i could access which at times was tricky.
good work!!! :d
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Afternoon guys,

Any advice on how best to clean the inside of the spare alloy wheel in the boot?

Cheers.
 

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Any non acidic wheel cleaner should do Tim. And old tooth brush for tight corners of wheel moulding. :)
 

Oversize

Grand Master
Messages
5,753
Points
596
Location
Melbourne
Seriously you don't know how to clean a wheel? :confused: Take it out would be the first step....
 

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Seriously you don't know how to clean a wheel? Take it out would be the first step....
LOL:D:D:D
 

BenzBoy

Grand Master
Messages
7,520
Points
705
Location
Sydney - Centre of Civilisation
For truly baked on brake dust I like to use an acid cleaner - scrub with a bristle brush and then move on to less harsh cleaners. Here's where my secret weapon comes in handy; a piece of green bamboo cut to a sharp point. It will help break the surface tension between crud and wheel without scratching the wheel.
Of course, a Concours car should never be allowed to reach the point where it needs such treatment.
Regards,
Brian
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Seriously you don't know how to clean a wheel? :confused: Take it out would be the first step....

You know 'seriously', why didn't I think of that and it was just that simple.

No Brian the spare wheel has not been repainted.

The cost of having four wheels painted cost me a total of over $2000.

I last looked at the spare alloy two weeks and the inside & outside of the wheel was not to bad no baked on brake dust.

Thanks again for your advice Brian it is always appreciated.

Now seriously I must get back to more Concourse detailing.
 

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Seriously smile and enjoy your cleaning for the show. :D
 

BenzBoy

Grand Master
Messages
7,520
Points
705
Location
Sydney - Centre of Civilisation
You know 'seriously', why didn't I think of that and it was just that simple.

No Brian the spare wheel has not been repainted.

The cost of having four wheels painted cost me a total of over $2000.

I last looked at the spare alloy two weeks and the inside & outside of the wheel was not to bad no baked on brake dust.

Thanks again for your advice Brian it is always appreciated.

Now seriously I must get back to more Concourse detailing.
Simply polish the wheel and dress the tyre Tim and all will be good.
Regards,
Brian
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Tool kit arrived today.

Tool kit pouch is brand new and of course so are the tools.

Tools are genuine Mercedes.

Purchased a bottle of AutoGlym SRP from Repco today which was on special.

AG SRP was $15 for a 500ml bottle the AG was on still on special from Father's Day.

Rain here today at home has held me back detailing the car today.

300SE is off to the car detailers tomorrow morning to clean underneath the car.

The blue tool kit is the correct kit for the W126 Series.

I was informed today that I won't lose any Concourse points for having the blue tool kit.
 

Attachments

  • IMG_0436.jpg
    IMG_0436.jpg
    391.6 KB · Views: 4
  • IMG_0438.jpg
    IMG_0438.jpg
    385.3 KB · Views: 4
  • IMG_0439.jpg
    IMG_0439.jpg
    420.3 KB · Views: 5
  • IMG_0441.jpg
    IMG_0441.jpg
    407.8 KB · Views: 1
  • IMG_0442.jpg
    IMG_0442.jpg
    366.8 KB · Views: 3

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Just remember to fit the tool kit other wise you will lose points.:D
 
Last edited:

Helmet

Connoisseur
Messages
1,214
Points
59
Location
Sydney
Tool kit arrived today.

Tool kit pouch is brand new and of course so are the tools.

Tools are genuine Mercedes.

Purchased a bottle of AutoGlym SRP from Repco today which was on special.

AG SRP was $15 for a 500ml bottle the AG was on still on special from Father's Day.

Rain here today at home has held me back detailing the car today.

300SE is off to the car detailers tomorrow morning to clean underneath the car.

The blue tool kit is the correct kit for the W126 Series.

I was informed today that I won't lose any Concourse points for having the blue tool kit.

Thats interesting, can't remember seeing a blue one in a W126 ?
 
Similar threads

Similar threads

Top