Latest activity

The early and mid M116 and M117 engines, along with the 6.9 used the Frigidaire A6 compressor for the airconditioning. This was only...

Wow, I had no idea that Rovers were assembled in so many places! Thank you Bryce for such a very informative post! 🙏

An article about NZ rovers:

This picture commemorated the first 2000TC built in Trinidad, which came off the line on 21 April 1969. The three men represented...

New Zealand The New Zealand P6 assembly operation was the largest of all. Between April 1968 and 1976, more than 5600 cars were built at...

This content comes from James Taylors facebook page that can be reproduced with acknowledgement...

Even worse if you car has suffered unseen rust during its life. If you use the factory jack you may discover another major problem when...

Personally I’d go for a much lighter unit thats more suitable to the newer gases. But the mounting & drive mechanisms would be the...

The early and mid M116 and M117 engines, along with the 6.9 used the Frigidaire A6 compressor for the airconditioning. This was only...

I'll be interested to hear how you go. My experience of rebuilt compressors is that they leak after only a couple of years, I hope you...

You have to line up the timing marks on the cams & compare the deg on the balancer to check for stretch. I think the max was about...

Engine stone cold. Checked right side chain. Snug, would not lift off sprocket. Left side, with some slight effort, lifted up maybe 1/8*...

Shopping for new gaskets but want to make sure their of the correct OEM material which was what?

Engine stone cold. Checked right side chain. Snug, would not lift off sprocket. Left side, with some slight effort, lifted up maybe 1/8*...

Thanks Styria. Removed valve covers yesterday and the originals ( I assume ) are of the same material as those arrived via EBay Germany...