Engine bay photos

More threads by 260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Sorry for the delay posting photos of the engine bay out in the direct light.

You can see the rocker cover needs to be repainted as the paint is flaking and peeling off.

Ordered a new bonnet heat insulation pad should arrive in 10 days.

Insulation pad is the original pad 25 years old and also flaking and peeling off.

Anyhow have a look at the photos and see what you think?
 

Attachments

  • 300SE rocker cover.jpg
    300SE rocker cover.jpg
    114.1 KB · Views: 11
  • 300SE rocker cover (2).jpg
    300SE rocker cover (2).jpg
    114.6 KB · Views: 9
  • 300SE insulation pad.jpg
    300SE insulation pad.jpg
    92.4 KB · Views: 10
Last edited:

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Yes rocker cover will need to be painted and hood insulation replaced. You could also ask Craig who did ceramic coating on his 6.9 manifold as that would lift appearance dramatically. Coating is available in cast iron finish and it will drop engine bay temp about 15 degrees so hoses will last longer. I had chrome look done to my custom extractors for that reason its proven to lower temp.
 

Attachments

  • 33.jpeg
    33.jpeg
    26.4 KB · Views: 4
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Front & rear bumpers also need to be repaired get that done before next years Concourse.

Paint is peeling off the front bumper noticeable just above the licence plate.

Rocker cover and insulation pad will be done first.

More work to do does it ever end I guess the joys of old cars?!
 

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Every time you fix something you will notice something else needing attention its a slippery slope Tim. :eek:
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Every time you fix something you will notice something else needing attention its a slippery slope Tim. :eek:

The bearer of good news more hair loss on the top of my head something to look forward to!
:rolleyes:
 

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Don't worry I gave up yesterday and shaved my head. :D
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Sounds like a good idea to that myself.

Trying to stick to my budget when it comes to repairs sometimes I stay within budget and sometimes the budget blows out.
 

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Sorry Tim I have to agree with Brian here . And no it was not a full body wax :eek: . Beard is still on but time is limited as my girls will not see me with a beard. :D
 

Oversize

Grand Master
Messages
5,753
Points
596
Location
Melbourne
Concourse is an elite-level competition and that's not an elite engine bay; hence you didn't get the points required to win.

Same with the rest of the car; very clean yes, elite no.

Just remember the judges decision is final and not something that should be questioned unless there's obvious and proven impropriety.

Personally I couldn't be bothered since there's no scope to modify your car so it'll never have a chance to be better than it was when it left the factory. Plus it almost renders your car a very expensive garage ornament....
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Go and get a quote to get the bumpers repainted.

I do have just under 12 months to get the bumpers repainted.

Like I said the insulation pad has been ordered should be arrive next week.

Speak to my Mechanic about removing the rocker cover and will get it repainted as well.
 

motec 6.9

Prodigal Son
Messages
6,579
Points
250
Location
Cantberra
Get exhaust manifold ceramic coated at the same time they will look great in cast metal look . And they will always look great after doing. :D
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Ceramic coat the manifolds never seen or heard of doing that on a W126?

Ceramic coated manifolds wouldn't take away the originality of the car?
 
OP
260ebenz

260ebenz

Master
Messages
6,668
Points
175
Location
NSW
Michel with your background in body shop repairs what sort of cost would be involved repainting the front & rear bumpers?

What would your spray painter charge to repaint the bumpers on the 300SE?
 
Similar threads
Thread starter Title Forum Replies Date
Styria Detailing your engine bay Technical Information 21
chrisp Engine Bay Detailing Exteriors and Body Repairs 2
E200K Engine Bay Exteriors and Body Repairs 8
SELfor50 M117 Extractors - For W107 Engine Bay Gumtree/eBay/Facebook Listings 8
c107 [JT] The Rover IOE Engine Rover P4, P5 And P6 7
motec 6.9 W116 with M156 engine Mercedes W116 12
c107 Rover P6 3500S engine swap Rover P4, P5 And P6 16
SEL_69L What do yo think is the best Mercedes engine ever? AS the tr Talking Torque 8
Styria Rover P5 IOE engine rebuild Rover P4, P5 And P6 10
S Same Engine Articles 14
Oversize 6.9 Engine Mods by MKB Mercedes W116 5
Styria Bentley V12 Engine Assembly Websites and Links 2
Patrick_R New M139 4 Cylinder Engine Mechanicals 0
6.9forever Engine swap-M102 in W123 230E Mercedes W123 3
Sluggish W116 280s engine options Articles 6
6.9forever M117 - Engine shake at idle Mechanicals 6
Oversize Engine oil type and viscosity Technical Information 6
S New VW Engine Mechanicals 11
T 280 SL (107) slight engine miss Mercedes R/C107 2
Andrew280SEL Engine Ideas for a W114 Mercedes W114 and W115 15
Oversize MB 350 V8 Engine FS Gumtree/eBay/Facebook Listings 0
Oversize 6.3 and engine/trans for sale Gumtree/eBay/Facebook Listings 5
Styria 6.3 engine mounts Gumtree/eBay/Facebook Listings 0
A engine weight Technical Information 1
A engine refurbishment Mercedes W116 3
P Poor starting hot engine Technical Information 9
motec 6.9 Ford wins engine of the year Talking Torque 2
Styria Building an engine Technical Information 6
Styria Engine oil leaks Mechanicals 5
Styria 6.9 - Changing engine oil Technical Information 15
260ebenz AMG engine videos Websites and Links 8
Styria M189 (300 engine) Parts Gumtree/eBay/Facebook Listings 0
T Need a M110 engine! Mechanicals 21
260ebenz S320 W140 for sale- clean the engine Gumtree/eBay/Facebook Listings 2
260ebenz Engine just needs a tidy up Gumtree/eBay/Facebook Listings 9
motec 6.9 AMG M119 6.0 engine Gumtree/eBay/Facebook Listings 0
motec 6.9 M-100 on engine stand Mechanicals 1
S Engine swap Mechanicals 7
4 Engine Gearbox transplant on 450sEL Mercedes W116 21
Oversize AMG engine assembly Websites and Links 1
SELfor50 2 x M100 6.9 VRS Kits (1 total Engine Kit) + 2 1/4" Straight Back Exhaust Gumtree/eBay/Facebook Listings 1
L Turning the Engine Mechanicals 15
Oversize W116 engine sump guards Mercedes W116 3
motec 6.9 Engine for Michel Motorsports 3
Styria 6.3 engine in 280SL Pagoda Mercedes W198, W121 SL and W113 3
WGB M-B Publication - W116 with M117 engine Technical Information 5
Styria Mercedes Chassis & Engine numbers Websites and Links 0
Oversize Weight of a 6.9 engine & trans Mechanicals 26
BIGBENZ Engine removal Mercedes W116 3
Styria Removal of 6.9 engine oil tank Mercedes W116 4

Similar threads

Top